Rockwell Automation T7832 ICS Regent+Plus Historian Packages for Winterpret - Manual (Page 35)

Historian Package for W INTERPRET (T7832)
P D - 7 0 4 2 M a r c h , 0 6
35
Figure 21. Process Historian: View Source.
In the dialog you can scroll through the list to see the names
and descriptions of the variables defined as variable entries.
When you are through viewing the list of entries, choose OK
to close the View Source dialog box.
Control Menu
The Control Menu provides certain command that are
common to all function block monitors. These include Run,
Stop and Scan commands to control the execution status of
the entire application program. For descriptions of these
commands see Commands Common to all Function Block
Monitors in Section 7, Loading Monitoring and Testing
Application Programs in the Regent User’s Guide.
Additionally the Control Menu provides the following
commands that are used specifically for monitoring and
retrieving historical data from the Regent.
Monitor Contacts
This command displays a dialog box which displays the status
of the control parameters for the process historian function
block. The Monitoring Contacts dialog shows the status of the
Start Contact and Clear Contact, and the values configured
for Sample Time, Units and Period.