Rockwell Automation 20D PowerFlex 700H/S Frame 11 Replacement Power Structure - Manual (Page 5)

PowerFlex® 700S and 700H Frame 11 Replacement Power Structures 5
The jumper is located on the Rectifying Module(s). For drives with one
Rectifying Module, it is located on the upper-right side of the middle power
stack (V Phase). For drives with two Rectifying Modules, they are located
on the upper-right side of the middle (V Phase) and right-side (W Phase)
power stacks.
Figure 3 Common Mode Jumper and Rectifier Circuit Board Location
Voltage Class Amps Number of Rectifying Modules
400/480V AC 590 2
650 2
730 2
600/690V AC 460 1
502 1
590 2
Common
Mode jumper
Rectifier Circuit Board
Front View
of Assembly
There is one jumper located on each Rectifying
Module. The Rectifying Modules are located on
the upper-right side of the center and right side
power stack of the drive’s power structure.