Rockwell Automation 20D PowerFlex 700H/S Frame 11 Replacement Power Structure - Manual (Page 6)

6 PowerFlex® 700S and 700H Frame 11 Replacement Power Structures
Move the Common Mode Jumper to the Disconnected Position
1. Follow the lettered steps below to move the common mode jumper to the
disconnected position (refer to Figure 3 on page 5 for jumper location).
Task Description
Loosen the upper screw.
Remove the lower screw.
Move the jumper to the horizontal position.
Install and tighten the screws.
A
B
C
D
Rectifying Circuit Board
B
A
C
D Front View of
Power Structure