Configuration – Rockwell Automation T3408 ICS Regent DC Digital Input Modules User Manual
Page 11
(T3401, 02, and 08) DC Digital Input Modules
P D - 6 0 1 1 M a r - 0 6
11
Table 1. Slot Key Positions.
Module
Upper
Connector
Lower
Connector
T3401
4
15
T3402
10
15
T3408
12
15
Configuration
Each input module is configured using the W
INTERPRET
I/O
Configuration Editor. In the editor, you will perform the
three steps described below to configure the input module.
1) Set the Module Type:
Position the cursor on the module slot you wish to define.
Choose Set Module Type from the Edit Menu and select
the appropriate digital input module from the list.
2) Edit the Module Definition:
Choose Edit Module Definition from the Edit Menu. A
dialog box will open where you can define the input point
definitions.
Figure 8. Digital Input Module Definition.