Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 159)

7 • W ORKING WITH NETWORK STATION APPLICATIONS
7–15
•
•
•
• •
7 • Pl
aceh
ol
der
3. In the New/Open Site Edition (Network Station) Application dialog box, click the
Existing tab.
The value in the HMI Server Computer column reflects the status of the HMI server
added to that application. Status values include:
 Localhost - the HMI server is located on the current computer.
 computer name - the HMI server is located on the computer named (for example,
NVCARBCBAS113).
 <Unassigned> - no HMI server has been added to the application.
To rehost an HMI server
The applications restored from a .bak file need to be rehosted. For more information about
restoring a .bak file, refer to the FactoryTalk Help.
1. Use the HMI Server Backup and Restore utility to restore the HMI server. For more
information, please refer to the HMI Server Backup and Restore utility help.
2. Select Start > All Programs > Rockwell Software > FactoryTalk View >
FactoryTalk View Studio.
3. In the Application Type Selection dialog box, select View Site Edition (Network
Station), and then click Continue.
4. In the New/Open Site Edition (Network Station) Application dialog box, click the
Existing tab.