Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 303)

12 • S ETTING UP F ACTORY T ALK ALARMS
12–47
•
•
•
• •
12
•
Pla
ceho
lde
r
Alarm condition details vary, depending on the type of alarm. For a level alarm, for
example, details are listed for each alarm level (High High, High, Low, and Low Low).
For details about options in the Alarm Details dialog box, click Help.
Unsuppressing and suppressing alarms
Use the alarm status explorer to suppress and unsuppress alarms.
Suppress alarms that are not needed temporarily, for example, if they are interfering with
another alarm that is the root cause of the condition you need to correct.
Suppressed alarms are not shown in alarm and event summaries or banners. However,
they are recorded in the alarm and event log. To resume monitoring the alarm in alarm and
event objects, unsuppress it.
The Suppressed column in an alarm status explorer indicates whether an alarm is currently
suppressed.
You can also view alarm details from an alarm and event summary.