Rockwell Automation FactoryTalk View Site Edition Users Guide - Manual (Page 625)

23 • S ETTING UP TRENDS
23–29
•
•
•
• •
23
•
Pla
ceho
lde
r
This removes both the value bar and the delta value bar from the trend. However, if
you select Show value bar again, only the value bar will reappear.
Zooming the trend chart
Use zoom to view a selected area of the trend chart in more detail.
To zoom, use one of these methods:
 Right-click and drag the y-axis to zoom vertically.
 Right-click and drag the x-axis to zoom horizontally.
 Left-click and drag the chart to zoom into the selected area.
To restore the original trend chart view
 Right-click the trend chart, and then select Undo Zoom/Pan.
Panning the trend chart
Use pan to view areas of the trend chart that are outside the area of the chart you are
viewing. You must pause the trend before you can pan to an area.
To pause the trend
 Click the VCR-style pause button at the bottom of the trend.
To pause the trend, you can also right-click the trend chart, and then select Scroll.
To pan vertically
 Click and then drag the y-axis legend.
To pan horizontally
 Click and then drag the x-axis legend.
To restore the original trend chart view
 Right-click the trend chart, and then select Undo Zoom/Pan.