Rockwell Automation 20D PowerFlex 700S/H Fan Inverter Upgrade Kit (Frame 10-11) - Manual (Page 3)

PowerFlex® 700S and 700H Fan Inverter Upgrade Kit (Frame 10-11) 3
Step 2: Removing Covers
from the Power Structure Moving Control Frame
Task Description
Loosen the T8 Torx-head screws, which secure the Control Frame to
the drive enclosure (Remove screws on early frame 10 drives).
Swing the Control Frame out and away from the power structure.
A
B
B
Frame 10 Drive Shown
Frame 10 drives, from early production runs, have
holes instead of slots for these screws. You must
completely remove the screws from these drives in
order to swing-open the control frame.
or
A
A