Rockwell Automation 20D PowerFlex 700S/H Fan Inverter Upgrade Kit (Frame 10-11) - Manual (Page 7)

PowerFlex® 700S and 700H Fan Inverter Upgrade Kit (Frame 10-11) 7
Preparing a Frame 11 Power Structure
Task Description
Using a 17 mm wrench, loosen the three connections to the output
terminal next to the inverter assembly.
Proper tightening torque for reassembly is 29 ft - lb.
Cut cable-tie, which secures the cable to the capacitor and disconnect
that cable.
Disconnect the four wires from the fuse block on the center inverter
assembly.
A
B
C
A A A
B
C
C
C
C
Front View
of Left-hand Side
Front View
of Center of Power Structure
Right-hand
Inverter Left-hand
Inverter
Center
Inverter