Rockwell Automation 20D PowerFlex 700S/H Fan Inverter Upgrade Kit (Frame 10-11) - Manual (Page 5)

PowerFlex® 700S and 700H Fan Inverter Upgrade Kit (Frame 10-11) 5
Removing the Protective Covers
Task Description
Remove the four M5 Pozi-drive screws, which secure the top and
bottom protective covers to the main front protective cover, then
remove the top and bottom protective covers.
Note: you only need to remove the top and bottom covers to gain
access to the power terminals. You can remove the other covers
without removing the top and bottom ones.
Remove the four M5 Pozi-drive screws, which secure the main front
protective cover to the drive, then remove the protective cover.
Remove side protective covers
(Not necessary for Frame 11 Drives).
A
B
C
A
B
Frame 10 Drive Shown
A
A
A
B
B
B
C
Proper tightening torque for
reassembly is 4 N-m (35 lb.-in.).
C