Connecting a dc input drive, Connecting an ac input drive – Rockwell Automation 20D PowerFlex 700H/S Frame 12 Replacement Power Structure User Manual
Page 10
10
PowerFlex® 700S and 700H Frame 12 Replacement Power Structures
Step 6: Installing the ASIC
Board on the New Power
Structure
Connecting a DC Input Drive
Power structures are shipped from the factory pre-configured for DC input
operation.
Connecting an AC Input Drive
If you are installing an existing ASIC board on the new power structure,
continue with step 11 on
. If you are installing a new ASIC board on
the new power structure, continue with step 1 below.
1. Remove the cover from the existing ASIC assembly and the DC- bus
connection from the cover.
2. Unplug the fan that mounts on the ASIC assembly cover from
connector X1 of the ASIC board.
3. Disconnect the Feedback board that mounts on the ASIC assembly
cover from connector X26 on the ASIC board.
H11
H12
H13
H8
H9
H10
X6
X9
X15
X3
X4
X5
X2
X1
H4
H5
H6
H1
H2
H3
H7
X26
X11
X1 Fan connection
X26 Feedback board connection