Rockwell Automation 20D PowerFlex 700H/S Frame 12 Replacement Power Structure - Manual (Page 14)

14 PowerFlex® 700S and 700H Frame 12 Replacement Power Structures
Move the Common Mode Jumper to the Disconnected Position
Follow the lettered steps below to move the common mode jumper to the
disconnected position (refer to
Figure 2 on page 13 for jumper location):
Task Description
Loosen the upper screw.
Remove the lower screw.
Move the jumper to the horizontal position.
Install and tighten the screws.
A
B
C
D
A
B
C
D
Rectifier Circuit Board
Front View of
Power Structure