Rockwell Automation 20D PowerFlex 700H/S Frame 12 Replacement Power Structure - Manual (Page 6)

6 PowerFlex® 700S and 700H Frame 12 Replacement Power Structures
Step 3: Preparing the Old
Power Structure for
Removal 1. Remove the motor wiring from the power structure at the front of the
power structure.
2. Remove the ground connection from the lower right rear corner of the
power structure.
3. Remove the input (AC or DC) from the incoming terminals at the top of
the power structure.
AC Power connection
terminals
Drive frame ground
connection Motor connection
terminals
Power Supply Voltage
Feedback board
ASIC board