Rockwell Automation 1440-SPD02-01RB XM-220 Dual Speed Module - Manual (Page 52)

Publication GMSI10-UM004B-EN-P - May 2010
44 Installing the XM-220 Dual Speed Module
Figure 2.29 Reset Switch
The switch can be used to reset all latched relays in the module. This includes
the relays in the Expansion Relay Module when it is attached to the XM-220.
IMPORTANT
The Reset switch resets the relays only if the input is no
longer in alarm or the condition that caused the alarm is no
longer present.
DUAL SPEED
1440-SPD02-01RB
Press the Reset
Switch to reset the
relays