Rockwell Automation VSM-CE-1l, 3l, 3E Integrated Drive/Motor CE Filter Kits - Manual

CE Filter Kits for the VSM500 Integrated Drive/Motor 1
CE Filter Kits
for the VSM500 Integrated Drive/Motor
Model Numbers
VSM-CE-1I, VSM-CE-3I, VSM-CE-1E, and VSM-CE-3E
Instruction Manual D2-3464
Product Description
CE filter options are designed to be used with the VSM500 Integrated Drive/Motor. The main function of the CE
filter is to reduce the radio frequency conducted emissions into the main supply lines and ground wiring. This
instruction manual provides the steps needed to install the filter.
Important: Declarations of Conformity (DOC) to the European Union Directives are available for Reliance
Electric AC drive products. Please contact the Rockwell AutoFax service at 216-646-7777 for
copies of the Declaration of Conformity.
Verifying Kit Contents
Table 1 lists the available CE filter kits. Verify that your CE filter kit is rated for use with your VSM500 Integrated
Drive/Motor.
!
ATTENTION: Only qualified personnel familiar with the construction and operation of this
equipment and the hazards involved should install, adjust, operate, and/or service this equipment.
Read and understand this instruction manual in its entirety before proceeding. Failure to observe
this precaution could result in severe bodily injury or loss of life.
ATTENTION: The CE filter connects between the incoming AC supply line and the drive input
terminals. The filter must be installed by qualified personnel familiar with the drive and associated
machinery. Failure to observe this precaution could result in bodily injury and/or equipment
damage.
ATTENTION: An incorrectly applied or installed CE filter can result in component damage or a
reduction in product life. Wiring or application errors, such as incorrect wiring layout, incorrect
or inadequate AC supply or excessive ambient temperatures may result in malfunction of the
system. Failure to observe this precaution could result in damage to, or destruction of, equipment.
Table 1 – CE Filter Kit Contents
Kit Model
Number Version Rating Item Qty
VSM-CE-1I 1.0 115/230 VAC, 1 Ph., 14 A Internal Mount CE Filter 1
M4 x 8 TT Screw 5
M4 Internal Tooth Lock Washer 5
VSM-CE-3I 1.0 230/460 VAC, 3 Ph., 9 A Internal Mount CE Filter 1
M4 x 8 TT Screw 5
M4 Internal Tooth Lock Washer 5
VSM-CE-1E 1.0 115/230 VAC, 1 Ph., 14 A External Mount CE Filter 1
VSM-CE-3E 1.0 230/460 VAC, 3 Ph., 9 A External Mount CE Filter 1