Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 21)

Publication GMSI00-UM001A-EN-E - February 2005
The Enpac Ex 15
Inserting/Removing the Battery Pack
Battery status is low (>10% life remaining)
Battery status is very low (<10% life remaining)
Battery charging
IMPORTANT
The Enpac Ex will automatically notify you when the
battery status is 30% or lower. To clear the notification,
press the Decimal (.) key. The notification will periodically
appear until the battery is recharged or the power adapter is
attached.
When the battery status is 10% or lower,
communications is prohibited.
ATTENTION
Do not remove the battery access panel unless the Enpac
Ex has been powered off.
WARNING
Do not remove or insert the battery pack unless the area is
known to be nonhazardous.
IMPORTANT
Do not remove the battery pack unless it needs to be
replaced. This is necessary when the performance
deteriorates or there is a fault. The battery pack is rated for
500 charge cycles.
Table 2.5 Battery status icons
Battery Icon Meaning