Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 88)

Publication GMSI00-UM001A-EN-E - February 2005
82 Collecting and Reviewing Data
Emonitor automatically unloads the inspection codes from the Enpac Ex
when you unload the data.
Manually Entering a Numeric Measurement
For manual entry, the Enpac Ex automatically enters the Manual Entry
Numeric Measurement screen.
1. From the Data Collection screen, press READ/OK to start your
measurement for the current point. The Manual Entry Process
Measurement screen appears. Notice that a small data entry box appears
in the upper left corner for you to enter the value.
2. Use the numeric key pad to enter a value between zero and the full scale.
3. Press READ/OK to accept the value.
4. Press READ/OK to go to the next measurement and continue data
collection.
TIP
Tap the Esc button if you do not want to keep the
current measurement, or tap the Edit button to edit
the value.