Rockwell Automation 441-PEN25 Enpac Ex Data Collector - Manual (Page 70)

Publication GMSI00-UM001A-EN-E - February 2005
64 Loading and Unloading
Figure 4.1 Load/Unload dialog box
Set Up the Current Data Collector
You can have several active data collectors in Emonitor. However, you must
select one specific data collector before you load a list. The data collector you
select is called the current data collector. If you use several different models of
data collectors, you may need to select the current data collector before
unloading and loading. If you use only one model of data collector, you can
select the current data collector only once and not change it again.
An icon of the Enpac appears in the Set Up Collector button in the
Load/Unload dialog box if it is the current data collector. If not, follow these
steps to make the Enpac the current data collector and select the correct
communication settings.
1. Select Tools > Load/Unload.
2. Click the large Set Up Collector button in the Load/Unload dialog
box. The Set Up Data Collectors dialog box appears.
Click to set
computer
communication
options
Click to set data
collector
communication
options