Rockwell Automation EK-29000-DPH01 Dual Probe Holder - Manual (Page 6)

6 Dual Probe Holder
Publication GMSI10-UM028A-EN-E - November 2007
Installing the Dual Probe Holder
This section describes the installation of the Dual Probe Holder.
Receiving, Unpacking, and Inspection
Unpack the Dual Probe Holder and inspect for possible damage during shipment. Report any
damages immediately to the local transportation agent and submit a copy to Rockwell
Automation.
2109/30/05/1/05 2100 Series Reverse Mount 8 mm Probe with 0.5 m cable
2109/30/05/1/10 2100 Series Reverse Mount 8 mm Probe with 1.0 m cable
1442-PR-0812E0205N 1442 Series Reverse Mount 8 mm Probe with 0.5 m cable
1442-PR-0830M0505N 1442 Series Reverse Mount 8 mm Probe, Metric, with 0.5 cable
1442-PR-0812E0210N 1442 Series Reverse Mount 8 mm Probe with 1.0 m cable
1442-PR-0830M0510N 1442 Series Reverse Mount 8 mm Probe, Metric, with 1.0 cable
EK-43781I 9000A General Purpose Sensor
EK-43808I 9100VO Velocity Output Sensor
EK-43786I 9100CSA General Purpose Sensor
EK-43805I 9100T High Temperature Sensor
IMPORTANT
The Dual Probe Holder is also compatible with Bentley Nevada 3300 XL
(330105 and 330195) Series Probes.
Table 1 Dual Probe Holder Items
Rockwell Automation Cat. No. Description