AJA Ki Pro - Manual (Page 74)

Ki Pro v3.2 www.aja.com 74
connection status in addition to the Ki Pro’s serial number and software version. This
latter information is useful if you ever have to call AJA Technical Support to discuss a
problem or get help. Below the Connection panel, the Network panel shows the Ki Pro
systems on the network and allows you to switch control between systems. See
“Controlling Multiple Ki Pros” on page 95 at the end of this chapter for additional
information on using multiple Ki Pros. In the middle of each screen are selections and
information pertaining to the subject matter of that screen (i.e., the “Media” screen has
choices about the media formats you are using).
Ki Pro web screens closely mirror the parameter menus displayed on its front panel. In
each of the screens presented on the following pages, we’ll list the parameter menu
numbers that are related so you can read the full definitions. Additionally, the Status
screen lets you change parameter settings right on the screen if you right-click the
setting
Figure 21. Ki Pro Web Interface, Main Status Screen.
Config Screen
The Config screen is a general purpose screen used to configure Ki Pro’s I/O choices,
conversion choices, and also set up Ki Pro’s environment (name, clock settings, display
etc.)
S/N, software version Menu of Ki Pro Screens:
Click one to Display
that Screen
and connection status
Selections and Information
List of Ki Pros on the LAN: Alarms appear here
Click arrow or gear icon to show/hide
Network list and info.