Brother ULT 2003D - Manual (Page 20)

Setting Up 1-9
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
No. Part Name
Part Code
U.S.A. Others
15 Low shank adapter SA131 XA6126-002
16 Screw (large) XA5904-051
17 Scissors 184783-001
18 Chalk pen 184944-001
19 Cleaning brush (P.8-3) XA4527-001
20 Eyelet punch (P.3-55,64) 135793-001
21 Screwdriver (large) X55467-051
22 Screwdriver (small) X55468-051
23 Spool cap (small) 130013-004
24 Spool cap (medium) × 2 X55260-153
25 Spool cap (large) 130012-004
26 Vertical spool pin (P.1-37) XA3336-051
27 Spool felt X57045-001
28 Disc-shaped screwdriver XC1074-051
29 Embroidery set (medium) SA427 X81273-002
H 10 cm × W 10 cm
(H 4 inch × W 4 inch)
30 Embroidery set (medium plus) SA429 X81329-002
H 18 cm × W 13 cm
(H 7 inch × W 5 inch)
31 Spool net (P.1-37) 127610-000
32 Embroidery set (large) SA428 X81274-002
H 26 cm
× W 16 cm
(H 10-1/4 inch
× W 6-1/4 inch)
33
Embroidery set (small) SA426 X81275-002
H 2 cm × W 6 cm
(H 1 inch
× W 2-1/2 inch)
34 Foot controller 120V XA7290-051
(P.1-7) 230V XC0309-001
35 Needle plate cover (P.5-29) XA9939-051
36 Grid sheet set (P.7-1) SA507 X81277-001
37 Touch pen (P.9-3) XA9940-001
38 Knee lifter (P.1-7) XA6941-001
39 Embroidery bobbin SA-EBT XA8375-001
thread
40 Operation manual XC3200-001
41 Quick reference guide XC3265-001
42 Embroidery unit SA528 XC1291-002
carrying case
35
37 36 38
39 40 41
32
34
25
29 30
21 22 23
18 19 20
15 16 17
28
33
31
27
24
26
42
Note (For U.S.A. only)
Foot controller: Model P
This foot controller can be used on this machine
model ULT2001/ULT2002D/ULT2003D.
The screw of the presser foot holder is available through
your authorized dealer (Part code XA4813-051).