Using the machine settings key -20 – Brother ULT 2003D User Manual
Page 31
1-20
Setting Up
Using the Machine Settings Key
Press
to change the default machine settings (needle stop position, embroidery speed,
opening display, etc.)
Note
This function will be available in future technology upgrades.
1
Select the needle stop position (the needle posi-
tion when the machine is not operating) to be up
or down.
2
Select whether to use the sewing speed control-
ler to determine the zigzag width (see page 3-
34).
3
Make adjustments to character or decorative
stitch patterns (see page 4-12).
4
Select from among 10 displays when using the
Embroidery functions (see page 5-45).
5
Change the thread color display on the embroi-
dery screen; display the thread number, color
name, time to embroider, or one of the two cus-
tom thread color numbering sets (see page 5-42).
6
When embroidery data containing custom thread
colors specified with the PE-Design Ver. 5.0 is
saved on a floppy disk, the stored custom thread
colors are read as those from the sewing machine
if “ON” is selected for this setting.
7
Adjust the maximum embroidery speed setting
(see page 5-41).
8
Program version display
Note
Version 3.0, this is the installed software version for
your machine. Check with your local authorized
Brother dealer or at www.brother.com for notifica-
tion of an available updates.
Press
to go to the next screen.
1
Change the brightness of the LCD (see page 1-
16).
2
Turn the buzzer ON or OFF.
3
Turn the lamp ON or OFF.
4
Turn the opening screen display ON or OFF.
5
Turn application checking ON or OFF (see page
1-19).
6
Turn the display of each embroidery color ON
or OFF (see page 5-19).
7
Change the display language (see page 1-18).
1
2
3
5
4
1
4
2
3
5
7
6
8
6
7