Brother ULT 2003D User Manual
Page 281
Advertising
7-4
My Custom Stitch
3. Select whether one stitch or three stitches will be sewn between
the first two points. To sew one stitch, press
so that it ap-
pears as
; to sew three stitches, touch the key so that it ap-
pears as
.
4. Use the
keys to move
to the coordinates of the first
point that was made on the grid sheet (from step 2 on page 7-1).
5. Press
to add the point indicated by
.
6. Repeat steps 3 through 5 for each point that you have drawn on
the grid sheet until the stitch design is drawn on the screen as a
continuous line.
Note
If you make a mistake while setting points, press the
key to
erase the last point set.
7. Once you have finished entering the stitch data, press the
key.
Advertising