Brother ULT 2003D User Manual
Page 209
5-34
Embroidery
4. Set the base fabric for the appliqué in the embroidery
frame, and embroider “Appliqué Position.”
* Use the same thread color you plan to use when
attaching the appliqué in the next step.
5. Apply a thin layer of fabric glue or temporary spray
adhesive to the back of the appliqué material cut out
in step 2, and place it on the base fabric, aligning the
appliqué with the “Appliqué Position” pattern from step
4.
* If the appliqué material is a lightweight fabric, you
may want to use a fusible web on the back to stabi-
lize the fabric and for appliqué placement.
Fuse appliqué in place with an iron.
Do not remove fabric from the frame to iron the
appliqué material.
6. After attaching the appliqué material, sew “Appliqué.”
* Some patterns may not show all three appliqué
steps. Sometimes the “Appliqué” step will be shown
as a color.
7. To sew the rest of the embroidery pattern, change the
thread to the next thread color on the color sewing
order display, and begin sewing.
* For best sewing results clip all threads between color
steps.