Brother ULT 2003D User Manual
Page 219
Advertising
5-44
Embroidery
4. Use
to enter
the desired 4-digit number.
If you made a mistake, press
to erase the entered
number, and then enter the correct number.
1
Name of the selected thread color
2
Shows the entered number.
3
Press to erase the entered number.
5. Press
.
* If
is not pressed, the thread color number
will not be changed.
1
Press to apply the entered number to the selected
color.
6. Repeat steps 3 through 5 until all desired thread color
numbers are specified. To change a specified thread
color number, perform the steps described above to
enter the new number.
7. When you are finished creating the custom thread num-
bering set, press
.
* With thread colors where a number has not been speci-
fied, “----” appears for the thread color display.
1
2
3
1
Advertising