Brother ULT 2003D User Manual
Page 311
9-14
Troubleshooting
37.
This message is dis-
played when the
memory is full and the
stitch or pattern can not
be saved.
38.
This message is dis-
played when a previ-
ously saved pattern is
deleted.
39.
This message is dis-
played when the
machine is retrieving a
previously saved pattern
while in embroidery
edit mode.
40.
This message is dis-
played when, after
selecting a pattern,
,
,
, or
is
pushed and the pattern
is about to be deleted.
41.
This message is dis-
played when the
machine is in utility
stitch mode, and
is pushed.
42.
This message is dis-
played when the speed
control lever is set to
control the zigzag stitch
width, and the “Start/
Stop” button is pushed.
Use the foot controller
to operate the machine.
43.
This message is dis-
played when there is
not enough space on
the floppy disk to save a
selected pattern.
44.
This message is dis-
played when the
machine is in embroi-
dery edit mode, and
you try to use an editing
function when the
pattern is not com-
pletely within the red
outline.
45.
This message is displayed
when you try to save a
copyright protected pattern
to a floppy disk. According to
copyright laws, patterns that
are illegal to reproduce or
edit can not be saved to
floppy disks. If this message
displays, save the pattern in
the machine's memory.
46.
This message is dis-
played when the
machine is in twin
needle mode and a
pattern that can not be
sewn with the twin
needle is selected.