Brother ULT 2003D - Manual (Page 290)

My Custom Stitch 7-13
7
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
Retrieving a Stitch Design That Has Been Saved
Preparation
If the embroidery unit is attached, remove it.
1 Release button
* Turn off the power supply before removing the em-
broidery unit.
1. Press .
2. To retrieve a stitch pattern saved in the machine’s
memory, press .
To retrieve a stitch pattern saved on a floppy disk, in-
sert the floppy disk, and then press .
CAUTION
• Only insert or remove floppy disks while
or is displayed, or when
prompted to change disks by a message on the
screen.
• Do not insert anything other than floppy disks
into the floppy disk drive slot, otherwise the
floppy disk drive may be damaged.
• Do not insert a floppy disk containing pattern
data other than those saved using our data de-
sign equipment or a sewing machine, otherwise
the sewing machine may malfunction. (Only
.pes, .phc and .dst pattern files can be used.)
CAUTION
If the settings on this screen are locked ( ), no key
other than or can be operated.