Baumfolder BAUM20: Pile Folder 1st Station (in 2005) - Manual (Page 16)

TP10243-3 PAGE 16
EXAMPLE: Hold the MINUS Button, this will automatically count back to P00
(group P0). Now by Pressing the Button will take you to the next
Parameter Group P10 – P20 - P30 – P40 – P50 – P60
2.
Pressing and directly UNDER the left 3 digits of the Large 8 digit
display, this will select the individual Parameters in a select group.
EXAMPLE: Start with the first Group of Parameters, the 3 digit
display reads P00. Pressing the this will take you to Parameters
P01 – P02 – P03 – P04 – P05
- To go to the next Group of Parameters Press
The display will show P10. Pressing the button
will take you to Parameters P11 – P12 –P13 – P14 (continue this sequence
to move thru the rest
of the Parameter Groups P20 – P30 – P40 – P50 – P60
3. To change one of the machines Parameter Settings Press or
Buttons UNDER the right most 2 digits of the large 8 digit display.
The following is a list of the available parameters. Please see the Operators Manual for a defini-
tion of each parameter.