Baumfolder BaumCut 26.4 (For serials 69H1122 thru 76D1132) - Manual (Page 64)

K5B - 6
5.0 Automatic Operation
Operation: Shows maintenance intervals.
Has been set to 100.000 cuts by manufacturer.
Counter starts at "0" or other preset amount and counts upward. After reaching
100.000, at every start-up, the operation display will read
OBSERVE MAINTENANCE SCHEDULE
Select maintenance cut counter
Set counter:
1. Enter number of cuts via keyboard
2. Press key "Enter"
< automatic change of image back to selection image >
Maintenance Cut Counter