Baumfolder BaumCut 26.4 (For serials 69H1122 thru 76D1132) - Manual (Page 72)

K5B - 14
Block Programming
5.0 Automatic Operation
Example: Variation 3, selection : Four trim cut with labels
1. Select "Four trim cut with labels"
2. Menu: 1 Orig. sheet size
2 Sheet size tables
With this menu it is able to enter the original sheet size manually or to select a
sheet size from a sheet size table.
3. e.g.: Enter Orig. sheet size
4. Enter Original sheet size X, confirm with key
5. Enter Original sheet size Y, confirm with key
or
6. e.g.: Sheet size tables
7- Select desired sheet size by means of the cursor keys and confirm with
key
Confirm the sheet orientation or turn sheet orientation (observe paper grain)
Menu: 1 Sheet orientation OK
2 Turn sheet
8. e.g.: Sheet orientation OK:
will be continued on next page
Four trim cut
with labels