Prepressure time, Resting time for knife at bdc – Baumfolder BaumCut 26.4 (For serials 69H1122 thru 76D1132) User Manual
Page 84
K5E - 2
With spongy or soft stock it is recommended to increase the clamping time
before the actual cut.
The adjusted pre-pressing time is the period between start of clamping and
initiation of cut. For this purpose, 9 pre-clamping grades are available.
Make selection:
Select prepressing time:
< selection display is shown >
Adjustment of pre-pressure time:
Select desired prepressing time grade by entering the clamping grade
number
< after seletion the Program Data display appears >
_________________________________________________________________
Resting time for knife at BDC
By means of this function the time period "knife in
b
ottom
d
ead
c
enter (BDC)"
can be adjusted.
Adjustment of BDC time
Select desired time grade by entering the time grade number (1 - 9) with
the numerical keyboard
< after selection the Program Data display appears >
5.0 Automatic Operation
Prepressure Time