Baumfolder BaumCut 26.4 (For serials 69H1122 thru 76D1132) - Manual (Page 81)

K5D - 3
Subtraction Repetition Unit
5.0 Automatic Operation
Fast and easy programming of a sequence of equal cut sizes.
Procedure :
1. Move backgauge to desired initial position
2. Select "Auxiliary Functions" with key
3. Select "Subtraction Repetition Unit"
4. Enter label size (e.g.: 2 cm)
5. Make cut
After each cut backgauge moves forward 2cm until backgauge reaches the front
limit position.
Note :
The label size can be changed during this process.
After backgauge has reached the front limit position, backgauge moves back to
the initial position.
Quitt the function by selecting the function once more or by pressing key
"Automatic ON"
_________________________________________________________________
Graphics OFF
Switching OFF the graphic window of a Block Program shown in the Program
Data display.
activated function