Baumfolder BaumCut 26.4 (For serials 69H1122 thru 76D1132) - Manual (Page 71)

K5B - 13
Block Programming
5.0 Automatic Operation
Example: Variation 1, selection: Four trim cut
1. Select "Four trim cut"
2. Menu: 1 Orig. sheet size
2 Sheet size tables
With this menu it is able to enter the original sheet size manually or to select a
sheet size from a sheet size table.
3. e.g.: Enter Orig. sheet size
4. Enter Original sheet size X, confirm with key
5. Enter Original sheet size Y, confirm with key
6. or e.g. : Sheet size tables
7- Select desired sheet size by means of the cursor keys and confirm with
key
Confirm the sheet orientation or turn sheet orientation (observe paper grain)
Menu: 1 Sheet orient. OK
2 Turn sheet
8. e.g.: Sheet orient. OK
Enter Edge trim
9. Enter "Edge trim width X", confirm with key
10. Enter "Edge trim width Y", confirm with key
11. Finish entry with key "Enter"
< Program data display appears with a graphic window of the current
Block Programming variation (visible sheet orientation with order start),
see also page K5D - 3 "Graphics OFF">
Four trim cut