Bowflex TreadClimber 5000 - Manual (Page 11)

Owner’s Manual 7
Care of the Machine
Moving and Storage
The TreadClimber ® machine weighs 185 pounds (84 kg.) when fully assembled, and should never be moved or lifted
without taking some precautionary care.
There are two handles for lifting on the back of the base and two
wheels on either side of the front of the base beneath the console.
The TreadClimber ® machine requires 90 pounds (41 kg.) of force
to lift the base to achieve the 30 degree angle necessary to roll it
on the front wheels. As this is a considerable amount of force, it is
highly recommended that you do not attempt to ever lift or move the
TreadClimber ® machine without help.
When lifted correctly, your TreadClimber ® machine can be rolled
on the wheels for storage and/or cleaning. Failure to follow
precautions could result in physical injury to you, or damage to the
machine, or both.
Do not use the uprights, arms, or console to lift or move the
TreadClimber ® machine. Doing so could cause physical injury to
you, and could damage or destroy the TreadClimber ® machine.
Do not move the machine without aid. Injury to you or damage to
the machine can occur.
Put the power cord alongside the machine, out of your way
when you dismount the machine. Prevent stepping on the
power cord and plug.
Be sure to lock the treadles and remove the Safety Key for safe storage to prevent unsupervised use.
TreadClimber ® Base – Front Wheels
TreadClimber ® Base
Rear Lift Handles