Maintenance, Walking belt adjustment – Bowflex TreadClimber 5000 User Manual

Page 30

Advertising
background image

26

Owner’s Manual

Maintenance

• Light user (fewer than 3 hours/week): every 6 months
• Medium user (3-5 hours/week): every 3 months
• Heavy user (more than 5 hours/week): every month

We recommend that you use the following:

• Lube-N-Walk

®

Treadmill Lubrication Kit, available from Nautilus, Inc.

• 100% pure silicone spray, available at most hardware and auto parts stores.

Walking Belt Adjustment

The walking belts need to be adjusted if they are out of center

enough to cause a rubbing or scraping sound. Adjustments can

be made at the front roller of each treadle.

Belt Alignment

1. Visual Test – Stand beside the unit and set the speed at

1.5 mph. Stand in front of the unit to see the adjustment

bolts on each end of each front roller (Figure 1).

2. If the belt tracks too far to the right, use 3/16” hex key to

turn the right adjustment bolt (see Figure 2) clockwise in

full turn increments until the belt is aligned.

Note:

The belt will always move away from the tension bolt

being tightened.

NOTICE: Do not turn bolts counterclockwise to adjust belt

alignment. Bolts are turned counterclockwise only

to decrease belt tension.

3. If the belt tracks too far to the left, do the same thing on

the left adjustment bolt for that roller.

Belt Tension

Check the walking belt tension only when the machine is

unplugged. From the belt’s midpoint, a correctly tensioned belt

should only have 1” (2.5 cm) of give. To check, pull the belt

upward at its midpoint and measure the distance to the deck.

If the distance is more than 1” (2.5 cm), the belt is loose. To

tighten, turn both bolts clockwise one half turn and check

tension again. Repeat this step if necessary.

If a belt is too tight, loosen (turn counterclockwise) the

adjustment bolts one half turn and check the tension again.

Repeat this step if necessary.

NOTICE: Bolts are turned counterclockwise only to decrease

belt tension. Do not turn bolts counterclockwise to

adjust belt alignment.

Adjustment

Bolts

Adjustment

Bolts

Adjustment bolts

Figure 1 - Walking belt alignment (exploded view)

Figure 2

Figure 3 - Rear roller

Belt guides

Advertising
This manual is related to the following products: