Bowflex TreadClimber 5000 - Manual (Page 39)

Owner’s Manual 35
Condition / Problem Things to Check Solution
I/O cables (cables connected
in assembly Step 8)
If LED D is flashing when the belts are turning but belts
stop with err LS or OS displayed, the speed sensor
signal is not reaching the console. This indicates a
problem with the I/O cables.
Turn off the power switch and unplug the machine.
!
To reduce the risk of electrical shock or
unsupervised usage of the equipment,
always unplug the power cord from the
wall outlet and/or the machine and wait 5
minutes before cleaning, maintaining or
repairing the machine. Place the power
cord in a secure location.
Inspect connections for signs of visible damage to any
of the I/O cables. If no damage, check continuity using
a multi-meter. If a multi-meter is not available, contact
customer service for replacement cables and further
assistance.
Troubleshooting