Calculated Industries 4065 v3.0 - Manual (Page 3)

2 — C ONSTRUCTION M ASTER ® P RO / T RIG / D ESKTOP
The Construction Master Pro line includes the most advanced feet-
inch-fraction calculators designed specifically for building pro’s!
The Pro calculators handle practically any problem involving meas-
urements and can be used to save time, prevent errors, and accu-
rately perform common building projects such as: estimating con-
crete volume, squaring-up foundations, framing roofs, ordering lum-
ber, building stairs, walls, laying driveways, carpet or floor covering,
figuring precise angle calculations, or simply working in feet-inch-
fractions or decimal feet!
Your Calculator Helps You Solve:
• Dimensional Math Problems
• Conversions Between Feet-Inch-Fractions, Decimal Feet,
Decimal Inches, and Yards
• Imperial/Metric Conversions
• Problems Involving All Common Fractions — 1/2” to 1/64”!
• Area/Volume Calculations
• Board Feet/Lumber Calculations
• Circle Calculations
• Column/Cone Area and Volume
• Compound Miter Cuts for Crown Moulding
• Material Estimations and Costs
• Polygons
• Rake-Walls
• Right Angle/Triangle Solutions
• Roofing Materials
• Stair Layout (Risers/Treads)
• Studs
• Weight/Volume Conversions
Pro and Desktop Models ( NOT AVAILABLE ON TRIG MODEL #4080)
Also Solve:
• Block/Bricks, Concrete Footings and Drywall
• Instant Square-up, Perimeter, Wall Area, Room Area and
Volume
INTRODUCTION
4065UG-E-B 6/9/04 1:49 PM Page 2