Calculated Industries 5065 - Manual (Page 15)

10 — ElectriCalc Pro
(Cont’d)
♦
Second Press
Displays the maximum adjusted ampacity
of the calculated parallel wire size.
Displays: WIRE A
NOTE: No adjustments are made for
deration.
S P
— Derated Wire Size (D/R Size)
Used to calculate derated wire sizes
and allowable ampacity based on the
entered quantity of wires, NEC Table
310-16 and NEC Table 310-15(b)(2)(a).
Derated wire sizes are not calculated
when there are less than four wires, or
when the unit is in Free Air mode.
♦ First Press
Calculates the derated wire size, if you
have entered the number of wires, for
example,
4 S P
Displays: D/R WIRE SIZE
♦ Second Press
Displays the maximum adjusted am-
pacity of the derated wire size.
Displays: D/R WIRE A
♦ Third Press
Displays the derated adjustment factor
per the NEC Table 310-15(b)(2)(a).
Displays: ADJ %
♦ Fourth Press
Displays the NEC table referenced for
the calculation. Displays: NEC 310.15