Metrohm 840 PC Control 5.0 / Touch Control - Manual (Page 126)

3.16 Editing parameters
114
PC Control / Touch Control
commands and parameters can be found in Section 4. The input
range for all parameters can be found in the online help.
Select the command in the list for which you want to edit the
parameters and open the edit dialog with [Edit command]. In the
example shown the command DET pH has been selected.
The command number, the command name and the command
comment are always shown in the first row. The comment can be
edited in the input field.
Note!
The button Control device will only be shown when several control
devices have been configured in the device manager.
Open the edit dialog for the start conditions with [Start
conditions].
For many parameters (e. g. Start volume and Pause) you can enter a
numerical value directly, with other parameters (e. g. Dosing rate) you
can use the arrow to the right of the input field to alternatively select a
"special value" from the selection list. It is often only possible to
choose between various settings in a list (e. g. Measuring input under
Edit command/Sensor).