Metrohm 815 Robotic USB Sample Processor XL - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
815 Robotic USB Sample Processor XL ￭￭￭￭￭￭￭￭ 31
3.10 Equipping the titration head
Mounting the aspiration and rinsing tubings
1
2
3
6.1805.060
6.1805.510
6.1543.170
Figure 21 Installing the rinsing tubings and the aspiration tip
Proceed as follows:
1 Connect the rinsing nozzles
￭ Connect the three rinsing tubings that are already connected to
the Tower 2 distributor to the rinsing nozzles already mounted on
the titration head.
2 Insert the aspiration tip
￭ Insert the 6.1543.170 aspiration tip into the opening left on
the front of the titration head.
3 Connect the aspiration tubing
￭ Connect the 6.1805.510 aspiration tubing already connected to
the distributor with the aspiration tip.