Metrohm 830 IC Interface - Manual (Page 17)

2.4 Connection of external instruments
>CONFIG/RS settings
RS control: on
• 709 IC Pump:
Switch on external control of the 709 IC Pump using the
[ EXT. ] key.
• 752 IC Pump Unit, 753 IC Suppressor Module,
754 IC Dialysis Unit:
Switch on external control via remote interface using the
[ Remote ] switch.
• 817 Bioscan:
This instrument is already pre-configured, no additional set-
tings must be made.
• 761 Compact IC:
This instrument is already pre-configured, no additional set-
tings must be made.
• 750 IC Autosampler:
Always switch on the 830 IC Interface first and then the 750
Autosampler.
• 766 IC Sample Processor:
>RS232 settings
handshake: SWchar
>RS232 settings
RS control: on
• Triathlon Autosampler:
This instrument is already pre-configured, no additional set-
tings must be made.
• 812 IC Valve Unit:
This instrument is already pre-configured, no additional set-
tings must be made.
• 816 IC Eluent Selector:
Switch on external control via RS232 interface using the
[ EXT ] switch..
• 828 IC Dual Suppresso:
Switch on external control via remote interface using the
[ Remote ] switch.
• 837 IC Degasser:
This instrument is already pre-configured, no additional set-
tings must be made.
5 Create new system in «IC Net»
• Start the «IC Net» program.
• Create a new system file with the selected instruments (de-
tails see IC Net Instructions for Use).
830 IC Interface / 8.830.1003 Instructions for Use
11