Metrohm 920 Absorber Module - Manual (Page 83)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
920 Absorber Module
￭￭￭￭￭￭￭￭ 75
Figure 22 Combustion tube – Inlet
1 Water infeed inlet
Connection for the capillary with the blue
colored sleeve (7-
14 ).
2 Flame sensor connection
Connection for the flame sensor.
3 Oxygen infeed
Connection for the oxygen infeed. 4 Sample inlet
Solid and liquid samples: inlet for sample
boats.
Gaseous samples: connection of the LPG/
GSS module.
￭ Plug the capillary into a FAST connector (see Chapter "Replacing
tubing connections" in the Combustion Module operating
instructions).
￭ Carefully attach the FAST connector to the connection (22-1).
You can find information on connecting the flame sensor, the oxy-
gen infeed and the ABD in the Combustion Module operating
instructions.