Metrohm tiBase 1.1 - Manual (Page 103)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Configuration
tiBase 1.1
￭￭￭￭￭￭￭￭ 95
Note
The Default backup directory created during installation cannot be
renamed.
Directory
Entry or selection (with ) of the path for the backup directory.
Entry 1000 characters
Note
If the backup directory is on a network drive the saving date should be
added manually to the Backup name because the saving date infor-
mation is not available when the directory is restored.
Note
Make sure that you have read and write permission on the selected
directory.
3.2.3.3 Clients
Tab: Configuration ▶ &Tools ▶ Program administration ▶ Clients
Table with information about the computers on which tiBase is installed.
The table cannot be edited. With a click on the column title the table can
be sorted according to the selected column in either increasing or
decreasing sequence.
Client ID
Display of the ID for the client that has been entered for the client/server
installation.
Computer name
Display of the name of the computer on which the client has been instal-
led.
Status
Display as to whether tiBase has been started on the client (active) or
not (inactive).