Metrohm tiBase 1.1 - Manual (Page 224)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
216 ￭￭￭￭￭￭￭￭
tiBase 1.1
Search for whole word only
on | off (Default value: off)
If this check box is activated, then the field contents must be identical
with the search term during searches in Text fields (no part-search).
[Find next]
Search next occurrence of the search term.
4.5.2.4 Filtering determinations
4.5.2.4.1 Filtering determinations - Overview
Subwindow: Database ▶ Determination overview
The following possibilities exist for filtering determinations in the determi-
nation table:
￭ Filter selection in the filter bar
￭ Quick filter
￭ Special filter
￭ Last filter
￭ Remove filter
4.5.2.4.2 Determinations - Last filter
Menu item: Database ▶ Determinations ▶ Filter ▶ Last filter
The most recently used filter is reactivated with the Determina-
tions
▶ Filter ▶ Last filter menu item or the symbol.
4.5.2.4.3 Determinations - Quick filter
Menu item: Database ▶ Determinations ▶ Filter ▶ Quick filter
The Determinations ▶ Filter ▶ Quick filter menu item or the sym-
bol can be used to carry out a quick filtering for the content of the selec-
ted tabular field. After this function has been selected, the field in the
determination table in which the cursor is located will have a colored
background during navigation. At the same time, the following special fil-
ter symbol appears:
By double-clicking with the left mouse button you can set the content of
the selected field as filter criterion and apply it directly to the table.
Note
The quick filter can be applied again within the filtered table, so that
the number of entries can be limited step by step.