Metrohm tiBase 1.1 - Manual (Page 40)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
32 ￭￭￭￭￭￭￭￭
tiBase 1.1
2.4.3.9 Alphabetical command overview
￭ BRC
Coulometric bromine number determination
￭ CAL Cond
Determination of cell constants of conductivity sensors with the aid of
a known standard solution.
￭ CAL MEAS Conc
Measuring of calibration buffers for the calibration of ion-selective
electrodes.
￭ CAL MEAS pH
Measuring of calibration buffers for the calibration of pH sensors.
￭ DET pH
Potentiometric pH measurement with pH electrodes (measured quan-
tity pH).
￭ DET U
Potentiometric voltage measurement with metal electrodes (measured
quantity voltage U).
￭ DET Ipol
Voltametric measurement with selectable polarization current (meas-
ured quantity voltage U).
￭ DET Upol
Amperometric measurement with selectable polarization voltage
(measured value current I).
￭ DOS pH
Dosing of a specified volume with a solution (measured quantity pH)
￭ DOS U
Dosing of a specified volume with a solution (measured quantity volt-
age U).
￭ KFC
Coulometric Karl Fischer titration with voltametric measurement.
￭ KFT Ipol
Volumetric Karl Fischer titration with voltametric measurement (selecta-
ble polarization current).
￭ KFT Upol
Volumetric Karl Fischer titration with amperometric measurement
(selectable polarization current).
￭ MEAS Conc
Concentration measurement (direct measurement).
￭ MEAS Cond
Conductivity measurement.
￭ MEAS Ipol
Voltametric measurement with selectable polarization current
￭ MEAS pH
Potentiometric pH measurement with pH electrodes.