Metrohm 774 Oven Sample Processor - Manual (Page 62)

5 Detailed description
774 Oven Sample Processor, Instructions for use 56
Key Normal state Editing
.
<
PRINT Print report
• The <PRINT> key serves for
the manual printout of reports.
• The choice of printer type and
the parameters of the RS232
interface must be done in the
Configuration Menu unter
“>RS232 Settings”.
Text entry
• In a menu or sequence line in
which entry of text is required,
(for ex. method name), text edit
mode is activated with "<".
• Existing text is deleted in this
event and the text cursor is set
on the left margin of the text
field.
• "<" serves also for shifting the
chain of characters to chose
from, i.e. the text cursor is
shifted one place to the left for
each instance. See page 60.
>
*
RACK
-
Initialise sample rack
• The changer can be initialised
with key <RACK>. The con-
nected peripherals (e.g. Do-
simats or Dosinos) are not af-
fected by this.
• Once a method has been
loaded, it is retained. Sample
rack and lift are moved to ini-
tial position and automatic
rack detection is performed.
The rack can be removed in
the basic position.
Text entry
• In a menu or sequence line in
which entry of text is required,
(for ex. method name), text edit
mode is activated with ">" .
• Existing text remains in this
event and the text cursor is set
at the end of the existing char-
acter string.
• ">" serves also for shifting the
chain of characters to chose
from, ie. the text cursor is
shifted one place to the right
for each instance. See page
60f.