Metrohm 719 S Titrino User Manual
Page 18
2.4. Tutorial
719 S Titrino
14
Entry of the sample size
4 x <SMPL DATA>
<2>
<ENTER>
<SELECT>
<ENTER>
• Press <SMPL DATA> repeatedly until "sample size"
appears in the display.
• Enter 2.
• Use <SELECT> to select the unit "mL" and confirm
the new value with <ENTER>.
The result is now calculated and can be displayed in place of the end point. If your
method already includes a formula at the end of the titration, the calculated result is dis-
played directly after the titration. As we have entered the formula later, we now have to
select the result display:
Display of the result
<SELECT>
<ENTER>
• Press <SELECT> repeatedly until ">display results"
appears in the display.
• Press <ENTER> to move to the result display.
If you have a printer connected, you probably wish to have the curve and a result report
printed out automatically at the end of a titration.
To install a printer, see page 119.
smpl data
smpl size
1.0 g
smpl data
smpl unit:
g
SET pH
********
>display results
SET pH
********
RS1 3.71
g/l