Metrohm 719 S Titrino - Manual (Page 19)

2.4 Tutorial
719 S Titrino
15
Print reports
3 x <DEF>
<ENTER>
3 x <SELECT>
<;>
<ENTER>
<QUIT>
• Press <DEF> repeatedly until the display shows:
• Press <ENTER> to move to the definition of reports.
• With <SELECT> you select the individual repot
blocks. Use a ";" as delimiter between the report
blocks to print more than one block. If you wish to
print out a full result report, enter "full".
• Confirm the entry with <ENTER> and quit the inquir-
ies with <QUIT>.
Now print your reports by pressing <PRINT><REPORTS><ENTER>. Your printout will
look like the following:
Identification of the report type (fr=full report)
Device type, device number and program version
Initial pH value, mode and method name
Volume and pH value of EP1
Calculated result
The development of your method is now complete. Before we store it in the method
memory, you should check it again. Prepare a fresh sample and restart the titration with
<START>.
If everything appears to be all right, you can now store the method in the method mem-
ory.
def
>report
report:
report:curve;full
'fr
719 S Titrino 18200 719.0021
date 2002-03-13 time 17:34 1
pH(init) 2.40 SET pH ********
smpl size 2 ml
EP1 2.032 ml 8.14
RS1 3.71 g/l
---------------