Figure 30, Tool for piston seal – Metrohm 881 Compact IC pro – Anion User Manual
Page 78
Advertising
5.5 High pressure pump
■■■■■■■■■■■■■■■■■■■■■■
68
■■■■■■■■
881 Compact IC pro – Anion
for removing the old piston seal and a sleeve for inserting the new piston
seal.
2
1
Figure 30
Tool for piston seal
1
Pin
Tip for removing the old piston seal.
2
Sleeve
Sleeve for inserting the new piston seal.
Caution
Screwing the special tool for the piston seal (6.2617.010) into the pis-
ton seal destroys this completely!
1 Removing the piston seal
Caution
Avoid touching the sealing surface in the pump head (14-4) with
the tool.
Screw the special tool for the piston seal (30-1) with the narrow side
just as far into the piston seal as the same can be removed.
Advertising