Metrohm 711 Liquino - Manual (Page 66)

3.2 Tutorial
711 Liquino, Instructions for use 60
Running the GLP method
START
Z • When <START> is now pressed the display shows
Di spl ay: Not pr epar ed yet !
Run PREP no?
ENTER
YES
<1> or <2>
• Before a GLP test it is absolutely necessary that the Dosino cylinder
and the complete tubing system must be filled bubble-free with rea-
gent solution. Press <YES>.
Di spl ay: wast e por t :
t i p( 1) or f l ask( 2) ?
• Press <1> to empty the contents of the cylinder through the dosing tip
or <2> to return them to the bottle. Take care that the tips of the dos-
ing tubing is located in a vessel. Wait until the 711 Liquino has ended
the preparation (PREP) of all the Dosinos which are being used. The
instrument then returns to its normal state.
START
Z
• Press <START> again. The test procedure begins. Just follow the
instructions show on the display!